Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Freeport, TX

Rust Stain Removal for Stucco in Freeport, TX

Soft wash for stucco. Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry. Typical cost $150-$500.

Looking for rust stain removal for stucco in Freeport, TX? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. On stucco, the method we use is soft wash.

How we clean it

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

What to know about cleaning stucco

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

When to book rust stain removal for stucco

  • Orange or brown streaks where sprinklers hit
  • Orange speckles from fertilizer granules
  • Rust rings under furniture or planters
  • Orange runoff below metal railings

Where the grime comes from

  • Iron in well water or irrigation water
  • Fertilizer containing iron
  • Rusting metal furniture, railings and fixtures

Safe steps for homeowners

  • Sweep fertilizer granules off concrete right after spreading
  • Adjust sprinklers to avoid walls and paths
  • Ask about an iron filter for well-water irrigation

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Using the wrong acid, which can etch concrete or discolor siding
  • Pressure washing, which doesn't remove rust and can etch the surface

How we handle rust stain removal for stucco

  1. Identify the stain source
  2. Apply a surface-safe rust remover
  3. Let it work and rinse
  4. Repeat on stubborn spots
  5. Advise on stopping the source

How much does rust stain removal for stucco cost?

$150-$500Typical range for typical sprinkler or fertilizer staining
1-3 hoursTypical time on site
As needed; stains return if the source isn't fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Serving Freeport, TX and nearby towns

Rust stains from sprinklers fed by well water are common in Texas, along with tannin stains from leaves and the dark film mildew leaves on concrete.

Much of Texas has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

We provide rust stain removal for stucco across Freeport (ZIP codes 77541 and 77542) and nearby towns including Clute (5.4 mi), Jones Creek (5.9 mi), Lake Jackson (7.1 mi) and Richwood (7.7 mi). Call (555) 010-0000 for a free quote in Freeport.

Rust Stain Removal for Stucco: frequently asked questions

How much does rust stain removal for stucco cost in Freeport, TX?

Rust Stain Removal for Stucco typically costs $150-$500 for typical sprinkler or fertilizer staining, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for rust stain removal for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is rust stain removal for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule rust stain removal for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Freeport, TX

Graffiti Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$800

Storefront Cleaning

Storefront and entrance cleaning: sidewalks, walls, signs and windows, usually before or after business hours.

Typical $150-$500

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Fence Cleaning

Fence washing for wood and vinyl fences that removes gray weathering, green algae, mildew and sprinkler stains.

Typical $200-$600

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Driveway Cleaning

Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish.

Typical $150-$400

Deck Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$600

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Sidewalk & Walkway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $100-$250

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Freeport, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote